Im having issues printing with Bambu Matte Pla. For comparison I’ve printed with Generic PLA, Bambu Basic and Bambu Matte (Yellow and Ice Blue). Only matte quality is not good. I’ve also used AMS and external spool, to see if that makes a difference. PLA is new and was right out of the packaging, looked dry, but I will dry it overnight and print again. Anybody else had similar issues with ...

I have read all about the recent issues and remedies–tried them all, I just cannot get Bambu Studio connected to the server–my printers are ok, I can see the cameras, but not the AMS, and just can’t send prints over the network—tried downgrading recent firmware, etc. not sure what to do next–I will try wiping out all Bambu related files on the computer and starting over.

j’ai ma A1 combo depuis une semaine et après une quinzaine d’impressions la buse n’arrete pas de se bouché et le fil n’est plus entrainé meme avec une bobine bambu pla mat.j’ai suivi les wikis pour me depanner mais rien n’y fait.a 250° il y a extrusion mais a 220° cela se bouche. si vous avez des idées je suis vraiment preneur

For work we has some proprietary designs that we print. How do you print 100% offline to maintain company trademark items?

I Love using Bambu Studio for slicing and printing, but i often print on another pinter when my bambu lab are printing, i want to use bambu studio for my ender 3 V3 SE but i cant find the printer on the list. can someone help me how to properly add that printer parameter etc ? thank you. Greetings from indonesia.

All was fine, suddenly this happened. Filament eSun PLA+ All settings in accordance with eSun’s recommendations for this printer. (35°C bed temp, 220 nozzle temp). I can add that I have printed around 2 kg filament since I started it 4 weeks ago. Mostly all is fine, only problems I have is these kinds of prints with a rather large flat model. Any suggestions for what is happening here, what ...

Hi, I would like to request that Bambu or some 3rd party develop a glass build plate for the X1, I have them for my Enders and absolutely love them. Any seconds for this?

I have recently discovered PPS-CF and decided to prototype with it. I’m still using a standard X1C but plan on upgrading to a X1E if this filament is what I need. Just did my first print with PolyMaker Fibron PPS-CF10 making Benchy. 300C Print temp, 110C Plate Temp, 0.4mm nozzle, Textured Plate. Took about 20min for everything but actual print time was 10min. Came out pretty clean! Sounds ...

So I have been getting really inconsistent results printing ASA. Sometimes I get a little flex, sometimes a lot of deflection, sometimes full on delamination. I am using Bambu ASA with stock profile. Your tip, setting and prefers print surface would be appreciated.

I believe there are some BBl instructions for this, but recent I was able to add my own filaments such that they can be selected from the touchscreen on the X1C, selectable in Bambu Slicer, and ultimately can be synced into the slicer without being limited to only the defaults and their settings. I have posted this in a couple of other threads, but just though it should have it’s own so I ...