QIMA applies internationally recognized Acceptable Quality Limits (AQL) for all product inspections. Learn how to use our AQL calculator to ensure the quality of your products.

AQL sampling is most commonly applied during Pre-Shipment Inspection (PSI), where inspectors use the acceptable quality limit to determine how many units to check before a shipment is approved.

AQL (Acceptable Quality Level), Türkçesiyle "Kabul Edilebilir Kalite Seviyesi", bir parti içindeki maksimum hatalı ürün yüzdesini ifade eder. Bu oran, partinin sürekli kontrol altında kabul edilebilir bulunduğu en yüksek hata oranıdır.

‘ AQL ‘ stands for ‘ Acceptance Quality Limit ‘, and is a method used by many businesses to check a random sample from the production batch of their products and confirm that the risk of bad quality is relatively low.

AQL Nedir? AQL’in tanımını kısaca; "Tüm partiyi temsil eden küçük bir grubun sınavdan geçmesi" şeklinde tanımlayabiliriz. AQL 'in ingilizce açılımı Acceptance Quality Limit'dir. Bu da Türkçede kabul hata sınırını ifade etmektedir.

Acceptable quality level (AQL): AQL is typically considered the worst quality level still considered satisfactory. It's the maximum percent defective that can be considered satisfactory.

AQL (Acceptable Quality Limit) is the worst tolerable quality level for a production lot during random sampling inspection. Defined in ISO 2859-1 and ANSI/ASQ Z1.4, it tells you how many units to inspect from a batch and the maximum defects allowed before rejecting the entire lot.

Seviyesi (AQL) Acceptable Quality Level • AQL, tatminkar bir partideki uygun olmayan ürünlerin maksimum oranıdır. • Böylece, partideki uygun olmayan ürün oranı AQL’ye eşitse, bu parti büyük bir olasılıkla (örn. %95) kabul edilir. Bu da üretici için düşük risk olduğu anlamına gelir. • ABSI/ASQC Z1.4-1993 standardı ...

We use the internationally recognized Acceptable Quality Limit (AQL) standard for all product inspections. Clients can set their Acceptable Quality Tolerance level for each inspection and QIMA will provide results as within or beyond AQL.

AQL stands for ‘ Acceptance Quality Limit,’ and it’s an essential sampling method used in quality control. It’s defined in ISO 2859-1 as “The quality level that is the worst tolerable” over the course of many inspections.