Re: Hitachi 43HAE4251 - Vestel 17MB171 - Displays logo and reboots Ok, I solved it. A friend gave me the firmware for another motherboard 17MB170 and it worked, the brand logo is not Hitachi anymore, now is Regal, bit that is not a problem.

tv is digihome ptdr24hds3 vestel mb211s panel ves236wnvc 2d n12 thanks if anyone can help .have been searching for days now .

HOW TO TELL IF YOUR NEW (or old) TV IS MADE BY VESTEL There has been a lot of talk about the large previously high market brand names taking the easy way out and using companies like Vestel of Turkey to produce for them. There are plenty of fallacies regarding re-badgeing or re-packaging...

The Vestel produced model has a reasonable level of build quality, an effective remote control and a good set of connections despite only having two HDMI inputs. The smart platform is basic but does include almost all the major video services with the exception of Amazon Prime, the sound quality was adequate and the input lag was excellent at 29ms.

Re: Vestel service menu adjustment Thanks, but the problem is not being able to get the service menu up but not being able to change settings. Very few are in bold indicating they can be altered, most are shaded out. Perhaps I am missing something simple. Also I do not need to enter a password when accessing the service menu, perhaps this is the problem, not accessing it with the correct code ...

Re: VESTEL Main Board, LED TV. How to change the Boot Logo? If it's a vestel, then the quickest way is as follows: 1) Put the set into Digital TV mode, and press menu. 2) Enter 4725 in rapid succession on the remote, if the set is a vestel, you should see the service menu.

Re: Vestel 17IPS62 power supply dead by lighting Originally posted by dick_barton I wouldn't worry about the resistors R64, R65 & R66 being marked 10 ohms on the schematic. Whatever value is given on them, check with your meter that they read what it says otherwise change them. They are ok, all 3 of them are 39K, as are markings on them.

HI This is power supply sch of lcd tv VESTEL to in repair information the circuits have ps and inverter in one board (IP) or ps only thank you

Re: Dead Vestel 17IPS20 power supply repair (OK fuse, no shorts) Add on fault when the V led is like ok but the led brightness is low nothing (on but like at 3%) the Q501 to q501 (there are some revision whit 1 to 4 mosfets) are short. it triger the overload protection on u500 (mp3334) and no PWM signals on the gates of mosfets q502 q50e.

Hello, i need firmware for Vestel 17MB82S, panel VES315WNDA-2D-N11.